NEWS

Solga Diamant joins IACDS

Solga Diamant joins IACDS

Published 9/3, 2021 at 13:17

Solga Diament is a Spanish manufacturer of diamond tools that distributes its products in more than 50 countries.

New Simex RW 350 and RWE 35 wheel saws

New Simex RW 350 and RWE 35 wheel saws

Published 9/3, 2021 at 13:15

Simex has further expanded its range of wheel saws with new models for the RW and RWE ranges.

Conjet AB strengthens presence in North American

Conjet AB strengthens presence in North American

Published 9/3, 2021 at 12:19

Conjet, the Swedish manufacturer of hydrodemolition equipment, has recently set up its first US subsidiary. The company has hired Stephen Sistrunk to serve as the CEO and Rick Larsson as its national accounts manager for the US operation.

Precision with maximum efficiency

Precision with maximum efficiency

Published 9/3, 2021 at 12:09

The way a twin shaft shredding unit works is fairly simple: two tools moving in opposite directions draw in the collected waste material for shredding and crush it all together into smaller pieces.

Delays with asbestos removal in South Africa

Delays with asbestos removal in South Africa

Published 9/3, 2021 at 12:09

South Africa’s planned phasing out of asbestos, has encountered many delays, with no work being done since 2015 in some areas, reports PDi’s Kevin Mayhew.

Events

Published 9/3, 2021 at 12:00

The events include CSDA Annual Convention & Tech Fair, NDA ANNUAL CONVENTION 2021, BAUMA CONEXPO INDIA and more...

Two Italian demolition associations merge

Published 9/3, 2021 at 11:40

NADECO, the National Association for Demolition and Circular Economy in Construction, is the name of the new association created after the successful merger of the Italian Association for Demolition and the Italian Association for Controlled Demolition.

C&D World to proceed from 21 to 23 March 2021

Published 9/3, 2021 at 11:34

Responding to the wishes of its membership and board of directors, the C&D Recycling Association will go forward with its annual meeting and C&D World 2021, to be held from the 21 to 23 March in Austin, Texas, albeit by following and even going beyond all recommended CDC guidelines.

Priestly Demolition announced as new member of EDA

Priestly Demolition announced as new member of EDA

Published 9/3, 2021 at 11:31

With over 25 years of industry experience, Priestly Demolition Inc. is one of the largest, and best known, demolition contractors in Canada, being a trusted partner of many international companies and government agencies across North America and further afield. The company has offices in both Canada and the US, with plans to expand even further.

Demolition New Orleans cancelled

Published 9/3, 2021 at 11:30

The NDA has been closely following the news regarding Covid-19.

Evolution of the Mecalac MCR Series crawler skid excavators’ transmission

Evolution of the Mecalac MCR Series crawler skid excavators’ transmission

Published 30/12, 2020 at 10:16

The Mecalac 6MCR, 8MCR and 10MCR tracked skid excavators are now equipped as standard with the ‘Speed Control’ travel speed management system.

Rammer releases new multi-processor

Rammer releases new multi-processor

Published 30/12, 2020 at 10:15

Rammer has introduced a new RMP24R multi-processor which weighs in at 2,550kg, has a cutting force of up to 350bar, a 360° rotation and is suitable for carriers between 22t to 27t.

Flush cutting walls and roadside kerbs with the Lissmac ‘Compactcut’ 900 P/T

Flush cutting walls and roadside kerbs with the Lissmac ‘Compactcut’ 900 P/T

Published 30/12, 2020 at 10:14

The technology used with the Compactcut 900 P/T optimises efficiency removing the problems of dealing with the extraction and cost intensive disposal of cutting slurries as the specially equipped floor saw works using the dry cutting process.

Electro hydraulic solution improves fuel efficiency in construction equipment

Electro hydraulic solution improves fuel efficiency in construction equipment

Published 30/12, 2020 at 10:07

Volvo Construction Equipment and Finland’s Norrhydro have developed a digital hydraulic actuator that increases productivity while radically cutting fuel bills and CO2 emissions in construction applications. If widely adopted, it could help the industry meet its sustainability goals while at the same time improving machine performance.

ShoreTrench expands with new Bobcat E45 mini excavator

ShoreTrench expands with new Bobcat E45 mini excavator

Published 30/12, 2020 at 10:06

ShoreTrench, the developer of the UK’s first range of preassembled trench shoring systems and a subsidiary of Secure Ground Solutions Ltd, has purchased a new Bobcat E45 mini excavator, the first in the UK to be equipped with the Bobcat ‘Depth Check’ system.

Swedish diving concrete cutter company works above and below the water surface

Swedish diving concrete cutter company works above and below the water surface

Published 30/12, 2020 at 10:03

Specialist concrete cutter company RPP Dive AB possesses a unique level of competence for concrete cutting projects below the water surface, which is combined with concrete cutting equipment from Pentruder and support from Pentruder’s dealer SDC (Swedish Diamond Tool Consulting).

Arjes starts 2021 with a strategic reorientation

Arjes starts 2021 with a strategic reorientation

Published 30/12, 2020 at 10:01

At the beginning of next year, Arjes GmbH will present a strategic reorientation and divide its double shaft shredders into three basic product lines. These will consist of: ‘Impaktor-Arjes Compact class’; ‘Ekomaxx-Arjes Intermediate Class’ and ‘Titan-Arjes Heavy Duty Class’.

bauma China final report

bauma China final report

Published 30/12, 2020 at 09:55

PDi Magazine has now received the final update on the outcome of bauma China which was held in November this year. 2,867 exhibitors from 34 countries and regions exhibited with 80,000 visitors from China attending. The show had 300,000 m2 of exhibition space and was one of the few ‘face to face’ trade fairs held in 2020.

EvoQuip launches the versatile ‘Falcon’ range

EvoQuip launches the versatile ‘Falcon’ range

Published 30/12, 2020 at 09:54

EvoQuip has added the Falcon range of finishing screens to its product portfolio which will consist of the Falcon 1220 and Falcon 1230, providing a solution for scalping, screening and stockpiling in self-contained units.

Doosan launches new DL-7 wheel loader series

Doosan launches new DL-7 wheel loader series

Published 30/12, 2020 at 09:35

The new DL-7 range is the culmination of the first complete redesign of the Doosan wheel loader range in 10 years, with the exterior design, in particular, undergoing a complete transformation.

Join our Newsletter

PDi TV

Info

×