With the new CM 140 and CM 180 it is possible to remove concrete, asphalt and epoxy coatings almost dust-free. In addition, thanks to the improved dust extraction system, it is now also possible to remove coatings and sealants containing harmful substances such as asbestos and tar. The complex extraction system provides additional protection for the operator and the surrounding area against the release of pollutants and fine dust. Further development has significantly expanded the range of applications for the machines, as pollutants containing asbestos; PCBs and tar have increasingly been found in bridge waterproofing and industrial floor coverings in recent years. The demolition and renovation of these structures requires the use of special processes that prevent the release of pollutants and fine dust and thus protect the machine operator and his surroundings.  

In addition to the usual areas of application in industrial halls, warehouses, high-bay warehouses the CM 140 can also be used in underground garages, parking decks and bridges thanks to its low weight of 10,000 lb/ 4.50 tons. Milling depths of up to 1 - 1.5 inches per pass enable daily outputs of 1500 - 3000 scf and are therefore considerably more economical than conventional scarifiers on the market. The machines in the CM series are characterized by high performance, environmental friendliness and sustainability.

www.lutec-int.com