Hitachi Construction Machinery helps to build a better Stockholm
Published 24/7 at 12:30(HCME) and KTEG, has taken centre stage on the first leg of a unique European tour named ‘Powering the Future’.
Here, the 14t zero emission machine was joined by two smaller electric models, the Hitachi ZX85-6EB and ZX55U-6EB, in a test held under cold climatic conditions on a significant infrastructure project in the Swedish capitol of Stockholm. The power for the machines was supplied by a 300kVA/422kWh battery charging unit that has been developed by Alfen NV, with collaboration of Itochu Corporation and HCM. Having signed a memorandum in October 2023, Hitachi Construction Machinery is working with its two partners to achieve zero emissions on European construction sites.
When contractor Bäckströms was asked by Delvator – the country’s Hitachi dealer – to participate in a project featuring three new electric excavators, the CEO Jerry Magnusson’s response was immediate: “We were incredibly happy and grateful as the City of Stockholm will implement a low emission zone in part of the city centre where many of our machines work at the end of this year. The second reason is that we aim to stay ahead of our customers’ requirements and satisfy them before they ask for a different solution. And finally, our group has set sustainable goals and indicated how these will be met, and the test is an important part of this programme.” The contractor then approached its customer, energy provider Stockholm Exergi, to check if it was willing for the ZE135 and charging unit to work on a cooling system project in the city’s rejuvenated Meatpacking District.
Zero emissions and less noise
“We’re aiming to get as close to zero primary energy use as possible and therefore the selection of the supplier and equipment for projects such as this are a top priority,” says Stockholm Exergi construction manager Johan Schröder. “The ZE135 is obviously quieter than conventional machines, we’re happy with the zero emissions and there’s even an onsite charging unit that is required to go with it.” The ZE135 helped install a 500m stretch of cooling pipes for Stockholm Exergi in February and March. The electric excavator was selected to excavate the trenches, lay pipes and backfill ready for the completion of the contract.
Bäckström’s Anton Silvennoinen explains how recharging works: “The ZE135 is used for about 3.5h each morning, and when the operator goes for lunch, we use the faster DC cable and recharge the machine’s battery in about 45min. The work continues until the end of the day, then we leave the machine connected to the slower AC cable overnight. It keeps the battery warm for optimum performance and it’s ready for work the next morning.”
Operator Sebastian Molin was given the opportunity to test the ZE135 on the project. “My feeling after driving the ZE135 for some time now is that it is comfortable and I love the hydraulics. It’s also strong, very productive, and fun to try something new. The biggest advantage of the ZE135 is the lack of noise. It’s much easier for me to communicate with my colleague when he is directing me, as we can hear each other so much better. At first, I was sceptical about testing the ZE135. However, now that I’m familiar with it, I think it’s a good machine and I would certainly recommend other operators to give electric power a try as well.”
After their stint in the Swedish capitol, the three electric machines will move on to visit other countries in Europe before they are highlighted on the Hitachi stand at bauma 2025 in Munich, Germany.