Yury Mokin
2010-01-02
In remembrance of a dear friend
 read
more...
New steel-cutting wire from Widecut
2010-01-02
Korean diamond tool manufacturer Widecut has taken a bold and far-sighted decision to add another product to its already impressive range. The new wire, marketed as HT-2, is designed to cut straight steel and extremely heavy reinforced concrete. PDi’s Ahn Sung reports.
read
more...
Tyrolit seeks 2011 European Concrete Cutting Champion
2010-01-02
The prestigious international championship in concrete drilling and sawing, arranged by Tyrolit, is now back again. The national competitions will carry on throughout 2010 to lead up to the big final in 2011. You that did not attend last time, now is your chance.
read
more...
Husqvarna ready for Bauma 2010
2010-01-01
Husqvarna will attend Bauma in April and display two brand new demolition robots, the DXR 250 and the DXR 140. With these the company has launched a totally new range of remotely controlled demolition machines within the space of two years.
read
more...
New single head grinder from SPE
2010-01-01
In PDi issue 4-2009 we published the annual feature on concrete floor grinding and polishing equipment. Space constraints prevented the inclusion SPE updates as well as information about the new single head grinder from SPE, which is now featured in this issue.
read
more...
New Premium*** diamond core drills
2010-01-01
Tyrolit is launching a new concept in diamond core drills called the Premium*** range. The new drill range, with CDL***, CDM*** and CDH*** models, guarantees better results, universal use and reliability under the harshest conditions, the company claims.
read
more...
Less dust, shorter drill times
2010-01-01
The new lightweight Tyrolit Premium *** DDL dry-drill bit requires very little pressure and reduces dust and drilling times. It is the ideal tool for the installation of sockets and junction boxes and smaller breakthrough jobs.
read
more...
HTC floor grinder gets design award
2010-01-01
The new floor grinder HTC 1500 ixT was recognized and awarded the Design Trophies silver medal during the recent trade show Batimat 2009 in France.
read
more...
Tyrolit’s new drilling gearbox
2010-01-01
Tyrolit Hydrostress has expanded its modular system of machines and components with a new drilling gearbox that can be used to drill holes of up to 1m diameter using high-frequency electric motors and standard hydraulic motors.
read
more...
Husqvarna’s new high cycle wall saw
2010-01-01
Husqvarna has introduced the new electric wall saw, the WS 482 HF based on the same technology as the WS 440 HF launched last year, but can hold up to 1.6m diameter blades and is operated by radio remote control.
read
more...
ICS® Introduces Diamond Chain Wall Saw
2010-01-01
In the USA the chain saw manufacturer ICS has introduced the latest CWS-200 concrete chain wall saw, which combines patented ICS diamond chain technology with a mechanized, track-mounted hydraulic power drive, allowing deep cutting without overcuts and less overall effort than other methods.
read
more...
Clean air from Italy
2010-01-01
The Italian company WLP S.r.l. in Trento that manufacturers dust suppression guns has strengthend its position on the global market during the last years. WLP provides a comprehensive technology for dust suppression and odour control for a wide range of industries.
read
more...
Atlas Copco’s new cleaner Cobras
2010-01-01
The 2010 generation of Atlas Copco Cobra™ petrol drill and breakers meet the stricter requirements of exhaust emission set by the US based Environmental Protection Agency.
read
more...
HTC opens new Educational Centre
2010-01-01
HTC’s new Customer and Educational Centre in Söderköping, Sweden, has a fantastic entrance with an HTC Superfloor™ like a mirror, a huge Academy Theatre with more than 50 seats, a modern restaurant area and a 500m2 indoor concrete slab to test all our machines and tools.
read
more...
New option for Bobcat loaders
2010-01-01
A new factory-installed road option is now available for all Bobcat loader models produced at the Bobcat compact equipment plant in the Czech Republic.
read
more...
Brokk acquires its Australian distributor
2010-01-01
The Swedish manufacturer of remotely controlled demolition machines, Brokk AB, has acquired the Australian company Kiwi Operations Downunder Pty Ltd. The companies have worked together for several years, Kiwi Operations Downunder being Brokk’s distributor in Australia.
read
more...
Chicago Pneumatic’s new breaker oil
2010-01-01
Chicago Pneumatic has introduced its fully synthetic Airolene Plus Tool Oil with anti-frost properties. The biodegradable lubricant has been developed for pneumatic paving breakers, chipping hammers and rivet busters.
read
more...
HTC 650 RX available internationally
2010-01-01
The new radio controlled HTC 650 RX grinding machine is now available internationally and is based on the same technique as the HTC 950 RX.
read
more...
Pullman Ermator AB appoints new Export Manager
2010-01-01
The Swedish manufacturer Pullman Ermator AB has during the autumn of 2009 appointed a new Export Manager. The new manager is Fredrik Hirn who already is well-known to the industry.
read
more...
New Sales Manager for ICS
2010-01-01
The US company ICS, Blount Inc, based in Portland Oregon has appointed Scott Brown as Western Regional Sales Manager.
read
more...
|
